Brazen Spout Replacement Kit

Brazen Spout Replacement Kit

Postby roastadmin » Thu Oct 10, 2013 3:01 am

If you were an early adopter to Brazen brewers you may have a carafe that dribbles when you pour coffee. Joe Behm, head of the company, is offering to send a Spout Replacement Kit to resolve this problem. If you read the instructions and/or watch the video than you will find the replacement pretty easy to do. Future builds of the Brazen and any purchased from us after 10/9/13 will have the newest spout.

Joe wrote:

Earlier this year, we were made aware of an issue concerning a relatively small percentage of carafes that dribbled. When the issue was brought to our attention, we brought it to the attention of the factory, which was surprised. Mr Coffee had used that carafe in over 200,000 units without any reports of this dribbling effect.

I want to personally apologize to every Behmor Brazen customer affected by this.

Despite the low overall percentage of carafes involved, we felt the best solution was to do a complete spout/upper portion redesign. The full vetting/testing is completed, and all involved are more than satisfied with the results. We hope you will be, too.

Starting Monday- September 20th, we will have a kit available for anyone interested (instruction sent via email) in swapping the old upper portion of the carafe with the new one. The swap requires two screwdrivers (small flat head and a Phillips) and about 5 minutes’ time.

Video of the procedure can be found at You Tube by doing a keyword search- Behmor Carafe Upper Portion or directly at: http://www.youtube.com/watch?v=66Ma7kRehd0

If you have a carafe that has issues with dribbling, please send an email to: support@behmor.com

Please provide the following data:

Subject line: Carafe Kit
Body: Name, address, serial number and where purchased. No P.O. Boxes, please.

I’d also like to thank all those who have assisted and displayed a great deal of patience while Behmor found a solution.

We’ll also be doing a swap on existing inventory, so all new units will ship with the corrected carafe and kits provided to distributors for distribution if needed.

Again, my personal and sincerest apologies for the issue and any inconvenience it has caused.

Best regards,

Joe Behm
User avatar
roastadmin
Site Admin
 
Posts: 11
Joined: Fri Feb 18, 2011 5:45 pm

Return to Replacement Spout Kit

Who is online

Users browsing this forum: No registered users and 1 guest

cron